Made-to-measure to meet your requirements
No matter how much timber you need to dry at one go, say from 10m3 till 200m3, XINAN will always have the most suitable kiln for you.
Why wood drying (woodworking) need our XINAN drying product:
No matter the wood is used as a construction material, or as a structural support or in woodworking objects, it will absorb or desorb moisture until it is in equilibrum with its surrounding. But wood drying unequally or too rapidly, shrinkage in the wood will cause damage to it. XN series of drying system will improve the wood drying quality efficiently, satisfying your requirement all the time.
1. XINAN Conventional Drying Kiln
XINAN Conventional Wood Drying Kiln uses fully automatic, semi-automatic, or manual control systems. The kiln body is made of all Al or civil engineering shell, the kiln door is of the opposite or hanging type. It is highly sealed and open, lightweight and flexible, especially for cold regions in Russia . Top thickness reaches 250 mm, and the wall thickness is 150 mm, ensuring normal operation at an ambient temperature of -30ºC to -50 ºC.
No matter how much wood you want to dry at once, from 10 m3, 20 m3 to 200 m3, XINAN can customize it for you and provide you with the most suitable drying kiln.
Main technology coefficient of drying kiln
| Model |
Capacity(m3) |
Dimension of Kiln(m) |
Power(KW) |
| XN20 |
20 |
4.3×4.8×4.8 |
6 |
| XN30 |
30 |
4.3×5.6×4.8 |
6 |
| XN40 |
40 |
4.3×6.6×5.6 |
9 |
| XN50 |
50 |
6.4×6.0×5.6 |
9 |
| XN60 |
60 |
6.4×6.6×5.6 |
9 |
| XN80 |
80 |
9.0×6.6×5.6 |
15 |
| XN100 |
100 |
9.0×8.6×5.6 |
15 |
| XN120 |
120 |
10.5×8.6×5.6 |
18 |
| XN150 |
150 |
13.5×8.6×5.6 |
21 |
| XN200 |
200 |
15.8×8.6×5.6 |
27 |
https://xinan1009.en.made-in-china.com/product-list-1.html
2. XINAN FAST WOOD DRYING KILN
In 2004, XINAN introduced mature drying technology for New Zealand pine and successfully produced rapid drying equipment for needle wood drying. By using rapid drying equipment, the drying speed is greatly improved compared to conventional drying equipment, and the drying time is significantly shortened. This not only saves resources, but also improves production efficiency and increases economic benefits. The XVT series products come in three standard specifications: wood volume of 60 m3, 80 m3, and 100 m3. They can also be customized according to customer requirements, resulting in faster sales and less investment, while maintaining excellent product quality.
https://xinan1009.en.made-in-china.com/product-list-1.html
3. XINAN High Temperature Heat Treatment Drying Kiln
Jiangsu XINAN Wooddrying Systems Co., Ltd., Institute of Nanjing Forestry University, took the lead in independently developing XNH series carbonized wood treatment equipment and process in China, with advanced equipment technology and reliable performance. The carbonized wood produced is widely used in various fields, fully expanding the application range of wood resources as solid wood products, and efficiently utilizing limited precious wood resources. The equipment has two structures to choose from: all aluminum alloy and carbon steel stainless steel composite.
XNH Main Technology Coefficient of XNH Series
| Model |
Capacity(m3) |
Dimension of kiln(m) |
Dimension of stack(m) |
| (All-aluminum assembled kiln) |
| XNH-TS16 |
16 |
4.5×4.4×5.0 |
4.0×2.4×3.2 |
| XNH-TS18 |
18 |
4.5×4.6×5.0 |
4.0×2.7×3.2 |
| XNH-TS25 |
25 |
6.6×4.4×5.0 |
6.0×2.4×3.2 |
| XNH-TS28 |
28 |
6.6×4.6×5.0 |
6.0×2.7×3.2 |
| XNH-TS33 |
33 |
8.6×4.4×5.0 |
8.0×2.4×3.2 |
| XNH-TS35 |
35 |
8.6×4.6×5.0 |
8.0×2.7×3.2 |
| -(carbon steel and stainless steel composite cylinder) |
| XNH-CS4 |
4 |
φ2.2×4 |
4×1.2×1.5 |
| XNH-CS6 |
6 |
φ2.2×6 |
6×1.2×1.5 |
| XNH-CS8 |
8 |
φ2.2×8 |
8×1.2×1.5 |
| XNH-CS15 |
15 |
φ2.8×8 |
8×1.8×2.0 |
4.XNK Series Heat Pump Heating Drying Kiln
XNK Series Heat Pump Heating Drying Kiln is a wood drying equipment that uses new high-temperature heat pump technology to replace traditional boiler heating methods. This equipment does not require the use of boilers for heating, has zero emissions and no pollution, and has lower operating costs compared to pure electric heating drying and boiler heating drying. It is also easy to automate and control, saving labor costs.
Characteristics of air drying equipment:
1. It can achieve fully automatic operation without needing to be on duty
2. The kiln body can be made of all aluminum alloy or Shijian shell
3. Adopting a new type of high-temperature heat pump for heating, without environmental accountability issues
4. Equipped with auxiliary electric heating, suitable for use in low-temperature environments
5.Compared to pure electric heating, it saves about 70% energy and reduces processing costs
5.XND series Roller Veneer Drying Machine
XND series Roller Veneer Drying Machine is suitable for the production process of cutting first and then drying, especially for the drying of thick veneer. It has the advantages of low drying loss, high efficiency and energy conservation, and good drying quality. The roller dryer adopts a unit structure design, consisting of a feeding table, drying chamber, cooling chamber, transmission system, discharge table, and control system. The number of equipment combinations can be selected according to user production
Installation Instructions
Pre-sale service
1) Provide the free consultation of equipment
2) According to the clients' special requirement ,offering the resonable plan and free design to help to select the equipment .
3)Welcome to visit our factory
Service during the sales
1) Inspect the machine before leaving the factory
2) Overseas: Send technical personnel to guide the installation and debugging of equipment
3) Train the first-line operator
After sales service
1) 24 hours online service
2) Provide technical exchanging
More information,
please ask our website:https://xinan1009.en.made-in-china.com/product-list-1.html
Audited Supplier 
){kind=link}