Made-to-measure to meet your requirements
No matter how much timber you need to dry at one go, say from 10m3 till 200m3, XINAN will always have the most suitable kiln for you.
Why wood drying (woodworking) need our XINAN drying product:
No matter the wood is used as a construction material, or as a structural support or in woodworking objects, it will absorb or desorb moisture until it is in equilibrum with its surrounding. But wood drying unequally or too rapidly, shrinkage in the wood will cause damage to it. XN series of drying system will improve the wood drying quality efficiently, satisfying your requirement all the time.
Product Description
1. XINAN FAST WOOD DRYING KILN
CONVENTIONAL WOOD DRRYING KILNS
* Automatic or semiautomatic or hand-operate control system
* Kiln housing can be all-aluminum or concrete and brick structure
*The folio doors and hanging doors are highly airtight opened and closed flexibly and easily
* The handing of wood is completed by forklift or the sliding vehicle with floor rail
* Energy source of wood drying kilns can be steam, hot-water, hot-oil, gas, and electricity
All-aluminum kiln housing is composed of covering panels, insulation layers, columns and trusses, Inner covering is aluminum panel, outer covering is aluminum panel too. Insulation layer is made of fiber glass or rock wool. The material of column and truss is special shaped aluminum.
To meet the cold climate in Russia, the thickness of the kiln roof is up to 250mm which can with stand the snow load of 300-400kg/m2, the thickness of the kiln walls is 150mm, which can guarantee the normal operation during the temperature of -30~-50ºC.
2. XINAN Conventional Drying Kiln
XINAN Conventional Wood Drying Kiln uses fully automatic, semi-automatic, or manual control systems. The kiln body is made of all Al or civil engineering shell, the kiln door is of the opposite or hanging type. It is highly sealed and open, lightweight and flexible, especially for cold regions in Russia . Top thickness reaches 250 mm, and the wall thickness is 150 mm, ensuring normal operation at an ambient temperature of -30ºC to -50 ºC. No matter how much wood you want to dry at once, from 10, 20 to 200 cubic meter, XINAN can customize it for you and provide you with the most suitable drying kiln.
Main technology coefficient of drying kiln
| Model |
Capacity(m3) |
Dimension of Kiln(m) |
Power(KW) |
| XN20 |
20 |
4.3×4.8×4.8 |
6 |
| XN30 |
30 |
4.3×5.6×4.8 |
6 |
| XN40 |
40 |
4.3×6.6×5.6 |
9 |
| XN50 |
50 |
6.4×6.0×5.6 |
9 |
| XN60 |
60 |
6.4×6.6×5.6 |
9 |
| XN80 |
80 |
9.0×6.6×5.6 |
15 |
| XN100 |
100 |
9.0×8.6×5.6 |
15 |
| XN120 |
120 |
10.5×8.6×5.6 |
18 |
| XN150 |
150 |
13.5×8.6×5.6 |
21 |
| XN200 |
200 |
15.8×8.6×5.6 |
27 |
https://xinan1009.en.made-in-china.com/product-list-1.html
3. XINAN High Temperature Heat Treatment Drying Kiln
Jiangsu XINAN Wooddrying Systems Co., Ltd., Institute of Nanjing Forestry University, took the lead in independently developing XNH series carbonized wood treatment equipment and process in China, with advanced equipment technology and reliable performance. The carbonized wood produced is widely used in various fields, fully expanding the application range of wood resources as solid wood products, and efficiently utilizing limited precious wood resources. The equipment has two structures to choose from: all aluminum alloy and carbon steel stainless steel composite.
XNH Main Technology Coefficient of XNH Series
| Model |
Capacity(m3) |
Dimension of kiln(m) |
Dimension of stack(m) |
| (All-aluminum assembled kiln) |
| XNH-TS16 |
16 |
4.5×4.4×5.0 |
4.0×2.4×3.2 |
| XNH-TS18 |
18 |
4.5×4.6×5.0 |
4.0×2.7×3.2 |
| XNH-TS25 |
25 |
6.6×4.4×5.0 |
6.0×2.4×3.2 |
| XNH-TS28 |
28 |
6.6×4.6×5.0 |
6.0×2.7×3.2 |
| XNH-TS33 |
33 |
8.6×4.4×5.0 |
8.0×2.4×3.2 |
| XNH-TS35 |
35 |
8.6×4.6×5.0 |
8.0×2.7×3.2 |
| -(carbon steel and stainless steel composite cylinder) |
| XNH-CS4 |
4 |
φ2.2×4 |
4×1.2×1.5 |
| XNH-CS6 |
6 |
φ2.2×6 |
6×1.2×1.5 |
| XNH-CS8 |
8 |
φ2.2×8 |
8×1.2×1.5 |
| XNH-CS15 |
15 |
φ2.8×8 |
8×1.8×2.0 |
4 . XINAN Vacuum Drying Kiln
XNZ series Vacuum Drying Kiln is tailored especially for thin veneer and types of wood that is hard to dry. XNZ series vacuum drying kiln is made of carbon steel- stainless steel clad cabinet . The thermal media of the kiln is hot water which can be provided by steam, hot oil, electricity and etc, with rapid heating speed and high thermal efficiency.
Description
| Model |
Power |
Dimension Inside |
Board Layer No. |
| XNZ-4F |
9KW |
5000×1600×1400mm |
24 |
| XNZ-6F |
11KW |
7500×1600×1400mm |
24 |
| XNZ-10F |
15KW |
9500×1600×1400mm |
24 |
| XNZ-15F |
17KW |
9500×2200×1800mm |
31 |
5.Heat Pump Heating Drying Kiln
XNK Series Heat Pump Heating Drying Kiln is a wood drying equipment that uses new high-temperature heat pump technology to replace traditional boiler heating methods. This equipment does not require the use of boilers for heating, has zero emissions and no pollution, and has lower operating costs compared to pure electric heating drying and boiler heating drying. It is also easy to automate and control, saving labor costs.
6.control system
XN-800 is a fully functional, intelligent, automatic wood drying control system developed by XINAN Wooddrying Systems Co., Ltd based on the research and development basis of drying equipment for more than 20 years with the cooperation of Institute of Drying Technology of Nanjing Forestry University. Its powerful function, safe and reliable, can meet the different needs of wood drying enterprises.
M800B and M828
XINAN automatic controller uses HOLZMEISTER, such as M800B and M828.
HOLZMEISTER series is stable and supports individual programs. About 80 drying programs can be used by the operator for wood drying. Heating, conditional venting and the running direction of the fan are automatically controlled to ensure good drying effect. Wood drying in the kiln can also be controlled by connecting HOLZMEISTER series controller to PC via special software.
Functions:
Automatic control:Time Schedule, Moisture content Schedule, Combinate Schedule of Time andMC
Bi-automatic control:
Remote control: The data can be sent to the cloud end, and the mobile phone can view the current drying data anywhere. Meanwhile, multiple drying kilns can be networked on a local computer, which is convenient to monitor the working conditions of all drying kilns and flexible control.
Fan frequency conversion control:
Logging historical data:
More information,
please ask our website:https://xinan1009.en.made-in-china.com/product-list-1.html
Audited Supplier 
){kind=link}